[1] 杨伟东^1,2;，刘志越¹;，王媛媛¹;，朱东彬¹;，张争艳^1,2;. 3DP工艺中STL模型中心排样策略研究. 机械工程学报, 2023, 59 1, 249-258.

[2] 屠熹远，杨伟东，王媛媛，高翔宇. 基于离散元法的非球形原砂颗粒堆积特性研究. 河北工业大学学报, 2023, 52 2, 9-15.

[3] 线洪萱. 基于多物理场的3DP工艺中关键技术研究. , 2022, 杨伟东, .

[4] Yang, Weidong;Liu, Ruiying;Zhang, Zhengyan;Zhu, Dongbin. Filling formation mode on additive manufacturinga survey. Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2022, 50 12, 10-21.

[5] Weidong YANG;Zaiwang WANG;Hanzhuo ZHAO;Yuefeng HOU. Displacement prediction of periodic term of Baishuihe landslide based on APSO-SVR-GRU model. Zhongguo dizhi zaihai yu fangzhi xuebao, 2022, 33 6, 20-28.

[6] 杨伟东^1,2;，线洪萱¹;，刘卫胜^1,2;，王媛媛¹;. 微滴喷射中喷嘴间距对微滴轨迹影响的研究. 现代制造工程, 2022, 第9期, P15-21.

[7] 杨伟东^1,2，董浩¹，万峰¹. 安时积分和扩展卡尔曼滤波的荷电状态估算. 河北工业大学学报, 2022, 第51卷 第1期, P15-20.

[8] Weidong Yang;Hongxuan Xian;Dongbin Zhu;Yuanyuan Wang;Yubing Shi. Numerical simulation of binder curing on the penetration in sand bed. Modern Physics Letters B, 2022, Vol.36 No.21, 2250015.

[9] Yang, Weidong¹²;Liu, Ruiying¹;Zhang, Zhengyan¹²;Zhu, Dongbin¹;. Filling formation mode on additive manufacturing：a survey [增材制造中填充方式研究综述]. Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2022, 50 12, 10-21.

[10] 高翔宇. 基于微滴喷射的3DP工艺中渗透误差分析与补偿技术研究. , 2021, 杨伟东, .